Ta strona używa cookies. Korzystając ze strony wyrażasz zgodę na używanie cookies (ciasteczek), zgodnie z aktualnymi ustawieniami przeglądarki.
x
+48 (12) 255 85 20krakow@cptrade.pl
+48 571 401 752jaroslaw@cptrade.pl
+48 (32) 760 60 53katowice@cptrade.pl
+48 571 33 88 33lodz@cptrade.pl
+48 (17) 583 19 75mielec@cptrade.pl
+48 695 020 771biuro.poznan@cptrade.pl
+48 514 040 723rzeszow@cptrade.pl
+48 (14) 631 67 80fhu@cptrade.pl
+48 571 33 88 44warszawa@cptrade.pl
+48 (33) 819 63 17bielsko@cptrade.pl
+48 (15) 814 91 21mielec@cptrade.pl
+48 (71) 336 50 09wroclaw@cptrade.pl
opole@cptrade.pl
+1 (281) 516 17 71houston@cpthouston.com
+49 2203 358 0660info@cpt-industrie.de
  • a
  • b
  • c
  • d
  • e
  • f
  • g
  • h
  • i
  • j
  • k
  • l
  • m
  • n
  • o
  • p
  • q
  • r
  • s
  • t
  • u
  • v
  • w
  • y
  • z
Zwiń drzewo produktówRozwiń drzewo produktów

Autotech Controls

Autotech Controls

Wyślij zapytanie ofertowe

Twoim zapytaniem zajmie się najbliższy przedstawiciel:

+48 (12) 255 85 20 krakow@cptrade.pl
Wyślij zapytanie

Wysyłając zapytanie akceptujesz Politykę prywatności

Autotech Controls Polska – Cptrade.pl

O firmie Autotech Controls

Autotech Controls to firma specjalizująca się w dostawie rozwiązań dla przemysły samochodowego, ale rozwiązania oferowane przez firmą są wykorzystywane w innych gałęziach przemysłu. Autotech jest częścią amerykańskiej Grupy AVG, skupiającej pod sowimi skrzydłami jeszcze takie marki jak EZAAutomation i Uticor. Grupa powstała w 1975 roku i od tego czasu wprowadziła na rynek amerykański ponad 500 innowacyjnych produktów, a jej klientami są m.in. takie firmy jak Ford, GM, P&G, IBM czy Kraft. Autotech Controls posiada dwa centra techniczne odpowiedzialne za badania, rozwój i produkcje, jedno w miejscowości Carol Stream w stanie Illinos oraz w Bettendorf w stanie Iowa. Prawie wszystkie produkty są projektowane i wytwarzane w USA. Produkty Autotech Controls słyną ze swojej niezawodności, innowacyjności oraz niezwykle wysokiej odporności na zakłócenia elektryczne. Produkty Grupy AVG można odnaleźć prawie we wszystkich gałęziach przemysły włączając w to wspomniany wcześniej przemysł motoryzacyjny, przemysł stalowy, spożywczy i napojów, wydobycie i przetwarzanie ropy i gazu, przemysł farmaceutyczny czy produkcja półprzewodników.

Produkty firmy Autotech Controls

Asortyment urządzeń otwiera najbardziej znany produkt Autotech Controls jakim jest programowalny wyłącznik krańcowy PLS. Autotech Controls oferuje kilkanaście wersji wyłącznika PLS (Programmable Limit Switch), wśród których znajdziemy m.in. takie modele jak M1020/25, serię M1050 (m.in. M1050A, M1051-R10, M1052), M1150/51, M1500, M1950 I2 PLS czy M8250, a także najnowsze rozwiązanie jakim jest dotykowy ekran TouchPLS służący do obsługi wymienionych wyłączników PLS. Wyłączniki PLS mogą być także częścią zaawansowanych monitorów kontrolujących działanie pras. Klient w zależności od potrzeb może wybrać spośród kliku monitorów oferowanych przez Autotech Controls, a są to m.in. monitor tonażu M1030-E, monitor ochrony matrycy M1200 czy kompletny program kontrolny dla pojedynczej matrycy M2020. Następną pozycją w ofercie Autotech Controls są resolvery (RL100, RL101, RL210) dostępne w obudowach o kliku rozmiarach (size 11, 25 i 40), jednoobrotowe, jednoobrotowe z przekładnią, w obudowie przeciwwybuchowej i zatapialnej. Resolvery te cechuje brak wewnętrznej elektroniki, są bezszczotkowe, odporne na duże różnice temperatur oraz są wyposażone w ekranowane przewody odporne na szumy. W zakresie pomiaru ruchu Autotech Controls posiada w swoim portfolio wybór obrotowych enkoderów inkrementalnych i absolutnych, oferowanych podobnie jak resolvery w 3 rozmiarach (size 11, 25 i 40) obsługujące sieci Profibus czy SSI. Najnowszym rozwiązaniem w ofercie enkoderów są bazujące na resloverach DigiSolvery (dostępne w dwóch rozmiarach 25 i 40), przetwarzające analogowy sygnał bezszczotkowego reslovera na sygnał cyfrowy poprzez wbudowany proporcjonalny konwerter śledzenia (ratiometrictracking converter). DigiSolvery są dostępne w trzech konfiguracjach, jako jednoobrotowe (Single-Turn), jednoobrotowe z przekładnią (Geared Single-Turn) oraz wieloobrotowe (Multi-Turn). Do odczytu danych z resloverów dedykowana jest szeroka gama dekoderów w postaci modeli DM2, DM7, M1890-S, M1890-R, M1150-M10, M1151 oraz M8000 i M8350.

Autotech Controls to także takie urządzenia kompaktowe jak zasilacze SmartPower™ Supply montowane na szynę DIN, zdalne wyświetlacze RD180 i RD360, przełączniki prędkości (PS111, PS112, PS119, PS127, QS132-134) oraz moduł skanera DeviceNet. W celu dokładnego poznania oferty firmy Autotech Controls zachęcamy Państwa do kontaktu z działem handlowym.

wyświetl kody produktówukryj kody produktów
SAC-M1020-010 - M1020 PLSSAC-M1025-010 - M1020 PLSASY-M1020-POI - Operator InterfaceMTP-M1020-010 - Operator Interface
ASY-M1025-POI - Operator InterfaceKSD-A12DC-10A - Power Output RelayKSS-120AC-3AMP - Power Output RelayKSS-60VDC-3AMP - Power Output Relay
KSS-200DC-1AMP - Power Output RelayEMC-M1050-W16 - EnclosureMBK-M1050-011 - Back Panel Mounting BracketSAC-M1050-A10 - M1050 Series PLS
SAC-M1050-M10 - M1050 Series PLSSAC-M1051-010 - M1050 Series PLSSAC-M1051-R10 - M1050 Series PLSSAC-M1052-010 - M1050 Series PLS
SAC-M1053-010 - M1050 Series PLSSAC-M1053-020 - M1050 Series PLSASY-RLYCH-08RL - Relay Output ChassisASY-RLYCH-08SS - Relay Output Chassis
CBL-RLYCH-DA4 - CableCBL-RLYCH-D04 - CableKSD-A12DC-10A - Electromechanical relay, Form A, SPST, 120 VAC @ 10 A, resistiveKSD-012DC-10A - Electromechanical relay, Form C, SPDT, 120 VAC @ 10 A, resistive
KSS-120AC-3AMP - AC Solid-state-relay 120 VAC @ 3 AKSS-60VDC-3AMP - DC Solid-state relay, 10-60 VDC @ 3 AKSS-200DC-1AMP - DC Solid-state relay, 200 VDC @ l AASY-BRAKE-RLY - Relay including socket required to wire brake input to the PLS, 120 VAC coi
ASY-M1052-8P - Optically isolated PNP sourcing output moduleASY-M1052-8PTA - Optically isolated PNP sourcing output module with addition of 4-20 mA analog velocity outputMBK-M1050-011 - Set of 2 back panel mounting brackets to mount M1050 series PLS on back panelENC-M1050-W16 - NEMA 12 enclosure with cutout, mounting holes, and a security clamp
SAC-RS232-485T - Adaptor for RS-232C to RS-485A. Required if a PC is used to connect to the M1051CBL-232MF-9Pxxx - Serial cable for connection of PC to RS-232 port on RS-232C to RS-485A adaptor. Note: xxx = length in ft, 010, 020, 050, and 50 ftCBL-09S22-Daxxx - 9-conductor cable with overall foil shield and sub D connector at one end for RS-485 port on RS-232C to RS-485A adaptor to M1051 serial port. Note: xxx = length in ft, 010, 020, 050, and 50 ftSAC-M1051-SR1.0 - Serial Communication Software for Windows-based programming of M1051 PLS
SAC-M1150-08P - PAK•PLS with 8 PNP type outputs and terminal blocks on the rear for resolver and output connectionsSAC-M1150-08N - PAK•PLS with 8 NPN type outputs and terminal blocks on the rear for resolver and output connectionsSAC-M1150-16P - PAK•PLS with 16 PNP type outputs and terminal blocks on the rear for resolver and output connectionsSAC-M1150-16N - PAK•PLS with 16 NPN type outputs and terminal blocks on the rear for resolver and output connections
SAC-M1151-8X10P - PAK•PLS with 8 Outputs and Programmable Analog Tach/Position Outputs, DC Power Input, and Brake Monitor and four program setupsASY-RLYCH-08RL - Chassis for 8 EM-relay outputs with motion detector output and built-in power supply (Use only KSD-012DC-10A SPDT relay)ASY-RLYCH-16RL - Above with 16 EM-relay output (Use only KSD-012DC-10A SPDT relayASY-RLYCH-08SS - Chassis for 8 solid-state relay outputs or electromechanical SPDT outputs (using KSD-A12DC-10AMP relays)
ASY-RLYCH-16SS - Above chassis for 16 solid-state relay outputs (using KSD-A12DC-10AMP relays)SAC-M1250-010 - 3-Digit, single-turn, basic unitSAC-M1450-300 - 3-Digit, single-turn, with ModZ and speed compensationSAC-M1450-400 - 4-Digit, single-turn, with ModZ and speed compensation
SAC-M1451-010 - 3-Digit, single-turn, with ModZ, speed compensation and brake monitorSAC-M1450-MROF - 3-Digit, single-turn with speed compensation and multiple rate offsetSAC-M1450-M10 - 6-Digit, single resolver, semi-absolute, basic unitSAC-M1450-D64 - 6-Digit, dual resolver 64:1 ratio, basic unit
SAC-M1450-D128 - 6-Digit, dual resolver, 128:1 ratio, basic unitSAC-1450-LT0 - 6-Digit, Linear Mini PLS basic unitASY-M1250-08TI - TTL outputs, cam module with terminal blockASY-M1250-08TD - 8 TTL outputs, with 15-pin sub D connector
ASY-M1250-08PI - 8 PNP outputs, cam module with terminal blockASY-M1250-08PD - 8 PNP outputs, with 15-pin sub D connectorASY-M1250-08NI - 8 NPN outputs, cam module with terminal blocASY-M1451-LCAMP - Logic Cam output module
ASY-M1451-LCAMN - Logic Cam output moduleASY-M1250-08AC - 8 Output, 120 VAC @ 0.5 A each output, 4 A max. per module, with terminal blockASY-M1250-08DC - 8 Output, 10-28 VDC @ l A each output, 4 A max. per module, with terminal blockASY-M1250-20MAP - Analog position/tach module, 4-20 mA current PNP (sourcing) sourcing output
ASY-M1250-20MAN - Above with current NPN (sinking) outputASY-M1250-010V - Above with 0-10 V analog outputASY-M1250-SER2 - Bidirectional RS-232C serial communication moduleASY-M1250-SER2L - Above module with long-line serial communication
ASY-M1250-SER4 - Bidirectional RS-422A serial communication moduleCBL-09S22-DAxxx - 9-conductor, cable with overall foil shield, and 9-pin sub D connector on one endCBL-15S22-DAxxx - 15-conductor, cable with overall foil shield and 15-pin sub D connector on one endCBL-18S22-Cxxx - 18-conductor shielded cable for use with modules with terminal block
ECM-15PIN-M11 - 15-pin male DSub connectorECM-09PIN-M11 - 9-pin male DSub connectorASY-RLYCH-08RL - Chassis for 8 electromechanical SPDT relay outputs (Use with KSD-012DC-10A SPDT relay only)ASY-RLYCH-16RL - Above with 16 electromechanical SPDT relay outputs (Use with KSD-012DC-10A SPDT relay only
ASY-RLYCH-08SS - Chassis for 8 solid-state relay outputs or electromechanical SPST outputs using KSD-A12DC-10A relaysASY-RLYCH-16SS - Above chassis for 16 solid-state relay outputs or electromechanical SPST outputs using KSD-A12DC-10A relaysKSS-120AC-3AMP - Solid-state relay, 120 VAC @ 3 AKSS-60VDC-3AMP - Solid-state relay, 10-60 VDC @ 3 A
KSS-200DC-lAMP - Solid-state relay, 200 VDC @ l AKSD-A12DC-10A - Electromechanical relay, SPST, Form A, 120 VAC @ 10 A, resistiveKSD-012DC-10A - Electromechanical relay, SPDT, Form C, 120 VAC @ l0 A resistive (for use with ASY-RLYCH-xxRL relay chassis only)CBL-RLYCH-DA4 - 15-conductor cable, with overall foil shield, 4 ft length and sub D connector on both ends, for interconnection of relay chassis to the PLS
CBL-RLYCH-D04 - 15-conductor cable, with overall foil shield, 4 ft length and sub D connector on one end and open on the other, for interconnection of relay chassis to the PLS cam moduleASY-OUTPT-16RL - Chassis for 16 electromechanical, DPDT relay outputsASY-OUTPT-16SS - Chassis for 16 solid-state relay outputsASY-OUTPT-16RS - Chassis for 8 electromechanical DPDT relay and 8 solid-state relay outputs
KDD-012DC-10SIG - 10 A (any VAC as long as does not exceed 10 A) DPDT electromechanical relayKSS-120AC-ERI - 3 A, 120 VAC, solid-state AC relay moduleKSS-055DC-ERI - 2 A, 3-40 VDC, solid-state DC relay moduleKSS-AC/DC-ERI - Low leakage (<0.1 mA), AC/DC solid-state relay module, 135 VAC (rms) @ 0.35 A or 190 VDC (max.) @ 0.5 A
ENC-M1250-N16 - NEMA 12 (IP52) enclosure for 16-channel PLSENC-M1250-W16 - NEMA 12 (IP52) enclosure for 16-channel PLS with see-through windowENC-M1250-N32 - NEMA 12 (IP52) enclosure for 32-channel PLSENC-M1250-W32 - NEMA 12 (IP52) enclosure for 32-channel PLS with see-through window
ENC-M1250-N40 - NEMA 12 (IP52) enclosure for 40-channel PLSEEC-15PIN-0TB - 15-position terminal block for main terminal block on M1250 and for cam modulesEEC-18PIN-0TB - 18-position Main terminal block for M1450/M1451MCP-M1250-011 - Cover plate for unoccupied cam module space
ECM-15PIN-M11 - 15-Pin sub D male connectorCBL-M1250-INPUT - M1250 to main terminal block connector for back panel mounted systemsCBL-M1250-OUTPUT - M1250/M1450 to output chassis for back panel mount systemsCBL-M1450-INPUT - M1450 to main terminal block connector for back panel mounted systems
SAC-M1250-010 - 3-Digit, single-turn, basic unitSAC-M1450-300 - 3-Digit, single-turn, with ModZ and speed compensationSAC-M1450-400 - 4-Digit, single-turn, with ModZ and speed compensationSAC-M1451-010 - 3-Digit, single-turn, with ModZ, speed compensation and brake monitor
SAC-M1450-MROF - 3-Digit, single-turn with speed compensation and multiple rate offsetSAC-M1450-M10 - 6-Digit, single resolver, semi-absolute, basic unitSAC-M1450-D64 - 6-Digit, dual resolver 64:1 ratio, basic unitSAC-M1450-D128 - 6-Digit, dual resolver, 128:1 ratio, basic unit
SAC-1450-LT0 - 6-Digit, Linear Mini PLS basic unitASY-M1250-08TI - TTL outputs, cam module with terminal blockASY-M1250-08TD - 8 TTL outputs, with 15-pin sub D connectorASY-M1250-08PI - 8 PNP outputs, cam module with terminal block
ASY-M1250-08PD - 8 PNP outputs, with 15-pin sub D connectorASY-M1250-08NI - 8 NPN outputs, cam module with terminal blockASY-M1250-08AC - 8 Output, 120 VAC @ 0.5 A each output, 4 A max. per module, with terminal blockASY-M1250-08DC - 8 Output, 10-28 VDC @ l A each output, 4 A max. per module, with terminal block
ASY-M1250-20MAP - Analog position/tach module, 4-20 mA current PNP (sourcing) sourcing outputASY-M1250-20MAN - Above with current NPN (sinking) outputASY-M1250-010V - Above with 0-10 V analog outputASY-M1250-SER2 - Bidirectional RS-232C serial communication module
ASY-M1250-SER2L - Above module with long-line serial communicationASY-M1250-SER4 - Bidirectional RS-422A serial communication moduleECM-15PIN-M11 - 15-pin male DSub connectorECM-09PIN-M11 - 9-pin male DSub connector
ASY-RLYCH-08RL - Chassis for 8 electromechanical SPDT relay outputs (Use with KSD-012DC-10A SPDT relay onlyASY-RLYCH-16RL - Above with 16 electromechanical SPDT relay outputs (Use with KSD-012DC-10A SPDT relay onlyASY-RLYCH-08SS - Chassis for 8 solid-state relay outputs or electromechanical SPST outputs using KSD-A12DC-10A relaysASY-RLYCH-16SS - Above chassis for 16 solid-state relay outputs or electromechanical SPST outputs using KSD-A12DC-10A relays
KSS-120AC-3AMP - Solid-state relay, 120 VAC @ 3 AKSS-60VDC-3AMP - Solid-state relay, 10-60 VDC @ 3 AKSS-200DC-lAMP - Solid-state relay, 200 VDC @ l AKSD-A12DC-10A - Electromechanical relay, SPST, Form A, 120 VAC @ 10 A, resistive
KSD-012DC-10A - Electromechanical relay, SPDT, Form C, 120 VAC @ l0 A resistive (for use with ASY-RLYCH-xxRL relay chassis only)CBL-RLYCH-D04 - 15-conductor cable, with overall foil shield, 4 ft length and sub D connector on one end and open on the other, for interconnection of relay chassis to the PLS cam moduleCBL-RLYCH-DA4 - 15-conductor cable, with overall foil shield, 4 ft length and sub D connector on both ends, for interconnection of relay chassis to the PLSASY-OUTPT-16RL - Chassis for 16 electromechanical, DPDT relay outputs
ASY-OUTPT-16SS - Chassis for 16 solid-state relay outputsASY-OUTPT-16RS - Chassis for 8 electromechanical DPDT relay and 8 solid-state relay outputsKDD-012DC-10SIG - 10 A (any VAC as long as does not exceed 10 A) DPDT electromechanical relayKSS-120AC-ERI - 3 A, 120 VAC, solid-state AC relay module
KSS-055DC-ERI - 2 A, 3-40 VDC, solid-state DC relay moduleKSS-AC/DC-ERI - Low leakage (<0.1 mA), AC/DC solid-state relay module, 135 VAC (rms) @ 0.35 A or 190 VDC (max.) @ 0.5 AENC-M1250-N16 - NEMA 12 (IP52) enclosure for 16-channel PLSENC-M1250-W16 - Above enclosure with see-through window
ENC-M1250-N32 - NEMA 12 (IP52) enclosure for 32-channel PLSENC-M1250-W32 - Above enclosure with see-through windowENC-M1250-N40 - NEMA 12 (IP52) enclosure for 40-channel PLSEEC-15PIN-0TB - 15-position terminal block for main terminal block on M1250 and for cam modules
EEC-18PIN-0TB - 18-position Main terminal block for M1450/M1451MCP-M1250-011 - Cover plate for unoccupied cam module spaceECM-15PIN-M11 - 15-Pin sub D male connectorCBL-M1250-INPUT - M1250 to main terminal block connector for back panel mounted systems
CBL-M1250-OUTPUT - M1250/M1450 to output chassis for back panel mount systemsCBL-M1450-INPUT - M1450 to main terminal block connector for back panel mounted systemsSAC-M1500-R10 - M1500 Pc•PLS with POI (Programmable Operator Interface). Without relays for PLS. (Electro-mechanical relays for PLC included)SAC-M1500-S10 - Same as above except with AC/DC solid-state relays for PLC. Select up to 8 relays (AC/DC solid-state) for PLCs and select 8 relays for PLS from section below.
KSD-A12DC-10A - Electromechanical relay SPST, Form A, 120 VAC @ 10 A .KSS-120AC-3AMP - AC Solid-State Relay, 120 VAC @ 3 A .KSS-60VDC-3AMP - DC Solid-State Relay, 10-60 VDC @ 3 AKSS-200DC-1AMP - DC Solid-State Relay, 200 VDC @ 1 A
SAC-M1500-SOFT - Programming software for M1500, runs on IBM-compatible PC. Includes relay ladder logic software for PLC and software for PLSSAC-M1050-SR1.0 - Windows based software for M1500 PLS programmingSAC-RS232-485T - Adaptor for RS-232C to RS-485A required if an IBM-compatible PC is usedCBL-M1500-PRG - Cable, Male RJ 11 phone 6-wire to DB9 male connector with shielded cable for connecting RS-485A port of RS-232C to RS-485A adaptor (SAC-RS232-485T) to M1500 (4 feet in length)
ASY-M1750-011 - 8-channel PLS chassis for electromechanical-relay outputsASY-M1750-1200 - 12-channel PLS chassis for electromechanical-relay outputsASY-M1750-0SS - 8-channel PLS chassis for Solid-state relay outputsASY-M1750-12SS - 12-channel PLS chassis for Solid-state relay outputs
ASY-M1750-359D - Resolver decoder source module, ratiometric, 360 counts, offset and displayASY-M1750-999D - Resolver decoder source module, ratiometric, 1000 counts, offset and displayASY-M1750-DISP - Display source module, no offsetASY-M1700-L11 - Dual-preset, Angle ON/Angle OFF module
ASY-M1700-LTD1 - Single-preset, Angle ON/Digital-time OFF module (1 ms-100 ms/count)MTP-M1750-8DEC - Top plate for decoder source module and 8 channel PLSMTP-M1750-12DEC - Above top plate for decoder source module and 12 channel PLSMTP-M1750-8DIS - Top plate for display source module and 8 channel PLS
MTP-M1750-12DIS - Above top plate for display source module and 12 channel PLSKDD-012DC-10SIG - 10 A, 125 VDC/250 VAC, DPDT electromechanical-relayKSS-120AC-ERI - 3 A, 120 VAC, Solid-state AC relayKSS-055DC-ERI - 2 A, 3-40 VDC, Solid-state DC relay
KSS-AC/DC-ERI - Low-leakage (<0.l mA), AC/DC solid-state relay, 135VAC (rms) @ 0.35 A. or 190 VDC (max.) @ 0.5 AENC-M1700-NEMA - NEMA 12 (IP52) enclosure without see-thru window for 8 channel PLSENC-M1700-W11 - Above enclosure with see-thru window including NEMA 1 plateENC-M1700-N12 - NEMA 12 (IP52) enclosure without see-thru window for 12 channel PLS
ENC-M1700-W12 - Above enclosure with see-thru window including NEMA 1 plateSAC-RD360-010 - Remote angle readout, 0-359SAC-RD999-010 - Remote readout/tachometer, 0-999SAC-M1950-010 - Base unit to support PLS, Die Protection and Tonnage at Angle modules
SAC-M1950-01A - Same as above plus supports Shut Height indication/control and Peak Tonnage ModulesASY-M1950-16x - PLS output module – 16 channelsASY-M1950-DPx - Die Protect Module for up to 8 inputsASY-M1950-PEK2x - Programmable Load (Peak Tonnage) Monitor with 2 channels (can only be used with SAC-M1950-01A
ASY-M1950-PEK4x - Programmable Load (Peak Tonnage) Monitor with 4 channels add (can only be used with SAC-M1950-01A)ASY-M1950-RAx - Tonnage at Angle Module for up to 4 sensors (Sensors are not included, see step 6)ASY-M1950-RSHIx - Resolver (multi-turn) based, absolute, shut-height indication module with 2 programmable limit outputs (Requires (1) SAC-RL210-G128M resolver and cableASY-M1950-RSHCx - Resolver (multi-turn) based, absolute, shut-height control module, consisting of 1 power output chassis, interconnecting cable (4 ft.), 8 relays, 1 SAC-RL210-G128M resolver (resolver cable is not included)
ASY-RLYCH-08SS - Chassis for 8 solid-state relay outputs or electro-mechanical SPST outputs using KSD-A12DC-10AMP relaysASY-RLYCH-16SS - Chassis for 16 solid state or electro-mechanical SPST (KSD-A12DC-10) relay outputsASY-RLYCH-08RL - Relay chassis with 8 electro-mechanical SPDT outputs (Use only KSD-012DC-10A SPDT relay)ASY-RLYCH-16RL - Relay chassis with 16 electro-mechanical SPDT outputs (Use only KSD-012DC-10A SPDT relay)
SAC-M8000-010 - 2-slot, A-B 1771 I/O Direct Transfer CradleSAC-VM6EU-010 - GE/Fanuc 9070 VME CradleSAC-TO505-010 - Siemens TI-505 CradleASY-M8251-010 - 3-Digit, 16 PLS Outputs, 1 Motion and 1 Fault Output
ASY-M8251-F10 - 3-Digit, 16 (fast) PLS Outputs, 1 Motion and 1 Fault OutputASY-M8250-POUT - PNP Sourcing OutputASY-M8250-NOUT - NPN Sinking OutputSBM-M1025-E7R - Standard Brake wear Unit with 3/8” shaft E7R Resolver, cable not included
SBM-M1025-RL100 - Standard Brake wear Unit with 5/8” shaft RL100 Resolver, cable not includedASY-M1025-POI - Plug-in Programming Interface PanelCBL-10T22-Mxxx - 22 Autotech, 10 conductor (5 twisted pairs) overall foil shielded cable, with 10-pin MS connector. xxx = to be filled in width length in feetSAC-M1030-RD4 - Base unit for tonnage at angle for up to 4 sensors. Relays are included for Q, D, and P outputs.
SAC-M1030-R08 - Base unit for tonnage at angle for up to 8 sensors. Relays are included for Q, D, and P outputs.SAC-M1030-GR4 - Base unit for 4 sensors with Graphic Communication Link for On-Line Monitoring and Profile ManagementSAC-M1030-GR8 - Base unit for 8 sensor with Graphic Communication Link for On-Line Monitoring and Profile Management.SAC-M1030-GM04 - Base unit for 4 sensors with Graphic Communication Link for On-Line and Critical Curve Monitoring.
SAC-M1030-GM08 - Base unit for 8 sensors with Graphic communication Link for On-Line and Critical curve Monitoring.SAC-M1030-SEND - 1 strain gauge sensor with amplifier assembly, box and cover, 2 torque pads and 4 mounting screws ¼ - 28 x ¾” socket head capSAC-M1030-SENW - 1 strain gauge sensor with amplifier assembly, box cover, 2 weld pads, 2 torque pads, and 4 mounting screws (1/4 – 28 x ¾” socket head cap)ASY-M1030-AMPD - Retro-fit amplifier assembly includes amplifier assembly for die sensors, screw terminals for sensor connection
ASY-M1030-AMP - Retro-fit amplifier assembly includes Amplifier assembly mounted on standard cover, screw terminals for sensor connectionASY-M1030-STG - Strain Gauge Element, with connector for Autotech’s Amplifier AssemblyKIT-M1030-INSTL - Installation kit includes Gauge block and temporary mounting screw, #8 HS drill bit, ¼ - 28 NF tap, and 4 temporary weld pad mounting screwsKIT-M1030-TORQ - Torque Pads (2), and mounting screws (4) ¼ x 28 x ¾”
KIT-M1030-WELD - Weld Pads (2), and temporary screws (4) ¼ - 28 x 1”SAC-M1030-SOFT - “PC” software used in conjunction with the Graphic Communication LinkSAC-M1030-SFTGM - “PC” software used in conjunction with the Graphic Communication Link and Critical CurveSAC-RS232-485T - Adaptor for RS232 to RS485 required if an IBM compatible PC is used instead of T60
SHT-M1150-M10P0 - Standard Unit, Rotary ShutHeight Monitor with PNP (Sourcing) outputsSHT-M1150-E7R - Rotary ShutHeight Monitor with PNP output, E7R Resolver, 30ft. resolver cableSHT-M1150-RL100 - Rotary ShutHeight Monitor with PNP output, RL100 Resolver, 30ft. resolver cableSDP-M1200-00E - Standard Unit with 4 sensor inputs, 4 PLS outputs, 4 counters with Electromechanical Relay
SYS-M1200-E7R - Complete System with 4 sensor inputs, 4 PLS outputs including Electromechanical Relays, 4 counters, 3/8” shaft E7R Resolver, 30 ft. CableSYS-M1200-RL100 - Complete System with 4 sensor inputs, 4 PLS outputs including Electromechanical Relays, 4 counters, 5/8” shaft RL100 Resolver, 30 ft. CableSHT-M1450-LNR - Standard Unit, Linear ShutHeight Monitor without Limit output module and Linear TransducerSAC-M1950-010 - Base unit to support PLS, Die Protection and Tonnage at Angle modules
SAC-M1950-01A - Same as above plus supports Shut HeightASY-M1950-16x - PLS output module – 16 channelsASY-M1950-DPx - Die Protect Module for up to 8 inputsASY-M1950-PEK2x - Programmable Load (Peak Tonnage) Monitor with 2 channels (can only be used with SAC-M1950-0-A
AXY-M1950-RAx - Tonnage at Angle Module for up to 4 sensors (Sensors are not included), see step 6)ASY-M1950-RSHIx - Resolver (multi-turn) based, absolute, shut-height indication module with 2 programmable limit outputs (Requires (1) SAC-RL210-G128M resolver and cable)ASY-M1950-RSHCx - Resolver (multi-turn) based, absolute, shut-height control module, consisting of 1 power output chassis, interconnecting cable (4 ft.), 8 relays, 1 SAC-210-G128M resolver (resolver cable is not included)ASY-RLYCH-08SS - Chassis for 8 solid-state relay outputs or electro-mechanical SPST outputs using KSD-A12DC-10AMP relays
ASY-RLYCH-16SS - Chassis for 16 solid state or electro-mechanical SPST (KSD-A12DC-10A SPDT relay)ASY-RLYCH-08RL - Relay chassis with 8 electro-mechanical SPDT outputs (Use only KSD-012DC-10A SPDT relay)ASY-RLYCH-16RL - Relay chassis with 16 electro-mechanical SPDT outputs (use only KSD-012DC-10A SPDT relay)SAC-M2020-010 - Resolver based, Single die set control, basic and without any I/O’s, resolver or cable
SAC-M2022-010 - Above for dual die set controlSAC-M2020-L10 - Linear transducer based, Single die set control, basic unit without any I/O’s, rod or cableSAC-M2022-L10 - Above for dust die set controlASY-M2020-INPUT - Die select module, used with Die ID box
ASY-M2020-OTPUT - Output card, 8 outputsASY-RLYCH-08RL - Chassis for up to 8 EM relaysASY-M2020-DIID - Die ID Box (Required one for each die)CBL-RLYCH-DA4 - 15 conductor cable with overall foil shield, 4 ft. length and DSub connector on both ends for interconnection of relay chassis to M2020 or M2022 (8 outputs per cable)
KSD-012DC-10A - Electro-mechanical relay SPDT, 120 VAC @ 10 amps resistive (Note: for use with ASY-RLYCH-08RI relay chassis only)SAC-M2022-S128 - Above for dual die set control includes 2 resolvers, 2 output modules, 1 Die select moduleSAC-M2022-SCA - Same as SAC-M2020-SCA except with dual die set control: 2 output cards, 2 resolvers and 2 power output relays with 2 interconnecting cables.SAC-M2022-SLIN - Above for dual die set control with 2 output modules, 1 Die select module. (Transducer rods not included)
MRS-RL101-RAD06 - Brushless resolver, single turn, size 11, 20” arc minimum accuracy (Replacement for SAC-RL101-010MRS-RL101-RAD20 - Brushless resolver, single turn, size 11, 20” arc minimum accuracy (Replacement for SAC-RL101-011SAC-RL100-010 - AUTOTECH ResolverSAC-RL100-M11 - AUTOTECH Brushless resover
SAC-RL100 - Size 40 Geared Single-turn ResolverSAC-RL210 - Size 40 Geared Single-turn ResolverSAC-RL210-G004 - Dual Brushless resolver, multi-turn, NEMA 13, 5/8" shaft dia., 4:1 built-in gear train between the two resolvers, terminal block for wiringSAC-RL210-G004M - Above with MS connector for wiring
SAC-RL210-G008 - Dual Brushless resolver, multi-turn, NEMA 13, 5/8" shaft dia., 8:1 built-in gear train between the two resolvers, terminal block for wiringSAC-RL210-G008M - Above with MS connector for wiringSAC-RL210-G016 - Dual Brushless resolver, gear train between the two resolvers, terminal block for wiringSAC-RL210-G016M - Above with MS connector for wiring
SAC-RL210-G032 - Dual Brushless resolver, multi-turn, NEMA 13, 5/8" shaft dia. 32:1 built-in gear train between the two resolvers, terminal block for wiringSAC-RL210-G032M - Above with MS connector for wiringSAC-RL210-G064 - Dual Brushless resolver, multi-turn, NEMA 13, 5/8" shaft dia. 64:1 built-in gear train between the two resolvers, terminal block for woringSAC-RL210G064M - Above with MS connector for wiring
SAC-RL210-125 - Dual Brushless resolver, multi-turn, NEMA 13, 5/8" shaft dia. 128:1 built-in gear train between the two resolvers, terminal block for wiringSAC-RL210-G128M - Above with MS connector for wiringE8R-SY101 -000MC - Explosion-proof, Selsyn resolver, single-turn, FM-approved Div. 1, Class 1, Groups B, C, and D, terminal connections, conduit fitting, 5/8" (15.88 mm) shaft diaE8R-RL101 -000MC - Explosion-proof, brushless resolver, single-turn, FM-approved Div. 1, Class 1, Groups B, C, and D, terminal connections, 5/8" (15.88 mm) shaft dia
SAC-RL501-500 - RL501 Pancake ResolverCPL-001/4-1/4 - 1/4" to 1/4" (6.35 mm to 6.35 mm)CPL-003/8-3/8 - 3/8" to 3/8" (9.53 mm to 9.53 mm)CPL-005/8-5/8 - 5/8" to 5/8" (15.88 mm to 15.88 mm)
EPM-10PIN-ITT - 19 pin male MS connector for multi-turn resolvers with MS connector (MS 3112E-14-19P)EPM-19PIN-ITT - 19-pin male connector for single-turn resolvers with MS connector (MS 3112E-14-19P)MMB-EN359-010 - Mounting bracket for sizes 25 & 40 resolversA15–30V5-AL-C6-003 - Optical Incremental Encoder
A25–PI–F–30V/5–S–10DL–AL - Smart-EncoderECM-05PIN-12MM - Communication Cable - 5-pin, size M12, mating connector, (female, cable end)ECM-07PIN-M16M - Communication Cable - 7-pin, size M16, mating connector, (female, cable end)ECM-08PIN-12MM - Communication Cable - 8-pin, size M12, mating connector, (female, cable end)
ECM-10PIN-M18 - Communication Cable - 10-pin, size M18, mating connector, (female, cable end)ECM-10REC-ITT - Communication Cable - 10-pin, size M12, mating connector, (female, cable end)E5N-G4096-8POME - Single-turn DigiSolver, NEMA 13, size 40 (4" dia), Heavy Duty, Gray code output 4096 counts, Input 8-30 VDC, PNP Sourcing Transistor Digital Output, Face Mount w/ End Mount ConnectorE5N-D3600-5TPRE - Geared Single-turn DigiSolver, NEMA 13, size 40 (4" dia), Heavy Duty, BCD output 3600 counts, Input 5 VDC, TTL with multiplexing Digital Output, 16:1 Gear Ratio, Face Mount w/ End Mount Connector with PC-sync circuit
E7N-AP20M-800FS - Single-turn DigiSolver, NEMA 13, size 25 (2.5" dia), Medium Duty, Analog output 4-20 mA current Sourcing, Input 8-30VDC, Flange Mount w/ Side Mount ConnectorMMB-EN359-010 - Mounting Bracket for E5, E7, & E8 DigiSolversCPL-003/8-3/8 - 3/8” to 3/8” Flexible coupling (1” dia. X 1.25” length)CPL-005/8-5/8 - 5/8” to 5/8” Flexible coupling (1.25” dia. X 1.5” length)
ECM-19REC-ITT - Mating MS Connector, 19 pin (for single-turn units)SAC-P5VDC-010 - Regulated DC Power Supply, 5VDC @ 3 AmpSAC-P12DC-010 - Regulated DC Power Supply, 12VDC @ 1 AmpSAC-P24DC-010 - Regulated DC Power Supply, 24VDC @ 1 Amp
SAC-RD360-010 - Remote angle readout, 0 to 359SAC-RD999-010 - Remote readout/tachometer/latch, 0 to 999 (CMOS compatible)SAC-RD999-MUX - Same as above (TTL/CMOS compatible with mux output)E8N-AP20M-800MC - Single-turn DigiSolver, Class 1, Div. 1, NEMA 4X Explosion Proof, size 40 (4" housing dia, 5/8" shaft dia), Heavy Duty, Analog Output 4-20 mA current sourcing, Input 8-30 VDC, Face Mount w/ Conduit Side Mount (terminal block)
E8N-G1024-8PORC - Geared Single-turn DigiSolver, Class 1, Div. 1, NEMA 4X Explosion Proof, size 40 (4" housing dia, 5/8" shaft dia), Heavy Duty, Gray code output 1024 counts, Input 8-30 VDC, PNP Sourcing Transistor Digital Output, 16:1 Gear Ratio, Face Mount w/ Conduit Side Mount (terminal block)DM2-STRAK - Single-Turn Resolver Decoder Snap Track MountDM7 - Programmable Resolver DecoderM1890-R - Programmable Position Transducer
M1890-S - Programmable Position Transducer and Selsyn IndicatorM1150-M10 - Programmable Resolver Decoder Multi-Turn with LimitsM1151 - Multi-Turn DecoderM8000 - Resolver Decoder Input Modules
ASY-M8350-010 - M8350 Resolver Decoder BusModuleE7R- RL101-000FE - Brushless resolver, Single Turn, NEMA 13, 3/8” shaft, Flange mount, end connectorE7R- RL101-000FS - Brushless resolver, Single Turn, NEMA 13, 3/8” shaft, Flange mount, end connectorSAC-RD180-M10 - Remote Display Master
SAC-RD180-010 - Remote Slave Display (Must be used with a master PLS or DecoderSAC-RD360-010 - Remote Display for displaying BCD data for position in 000-999 rangeSAC-RD999-010 - Remote Display for displaying BCD data for position & RPM in 000-999 rangeSAC-RD999-MUX - 3-Digit BCD display, with multiplex option to display position & RPM in 000-999 range. (Used with M1250 and M1450 only, equires 1 BCD and 1 tach module.)
SMC-PS111-05SEC - Zero-speed switch, 12-1200 PPM minimumSMC-PS111-30SEC - Zero-speed switch, 2-200 ppm minimumSMC-PS111-60SEC - Zero-speed switch, 1-100 ppm minimumSMC-PS111-180SEC - Zero-speed switch, 1/3-30 ppm minimum
SMC-PS112-1500 - Adjustable Speed Sensor, 150-1500 ppmSMC-QS132-010 - Proximity Sensor, unshielded, 0-60” sensing range (includes mounting bracket)SMC-QS133-010 - Proximity Sensor, shielded, 0.250” sensing range (includes mounting bracket)ADP-QS132-011 - Adapter 30mm to ½”, 14 NPT (internal) conduit
SMC-PS119-MRSIR - Anti-Plugging Zero Speed SwitchSMC-PS119-RLY - Relay 10 A, 2 form C output contacts for straight zero-speed applicationSMC-PS119-MM11 - Memory Module for ability to start in the same direction before coming to a stopSMC-PS119-CEM - Chassis for use with PS119-RLY relay output
SMC-PS119-CEM11 - Chassis for use with PS119-MM11 Memory ModulesSMC-PS127-A10 - Voltage Sensor, Zero-Speed SwitchQS132-134 - Proximity Switches/SensorsSMC-QS132-010 - Unshielded, 06” sensing range
SMC-QS133-010 - Shielded, 0.25” sensing rangeSMC-QS134-010 - Shielded, 0.2” sensing rangeSAC-QDNET-010 - TSX Qaunntum DeviceNet Scanner Module